Camera Corps Q3 Robotic Camera System SET – Pan Tilt Camera system
- Monitor not included, test image shown is poor due to photostudio lighting conditions.
The Q3 robotic camera system is based around four main components. The main Q3 head, the interface unit, the joystick control and the RCP.
Q3 has some major improvements over its Q-Ball predecessor. These include an improved camera block providing higher sensitivity, resolution and features such as genlock.
Specifications :
- Camera :
- Sensor : 1/3″ RGB Bayer progressive CMOS sensor
- Effective Pixels : 2.1M pixels
- Lens : 20x Optical zoom
- Angle of View : 59.4° (wide) ~ 3.0° (tele)
- Zoom Speed : Max Wide to Tele 3 secs
- Focus Speed : 10 secs max
- Iris : 101 steps from Close to F1.6
- Master Black : 127 steps
- Test Sig : Colour Bars
- Formats : 1080p/60, 1080p/50, 1080p/30, 1080p/25, 1080p/24, 1080i/60, 1080i/50, 1080i/30, 1080i/25 (p59.94, p29.97, p23.97 also available)
720p/60, 720p/50, 720p/30, 720p/25 (p59.94, p29.97, p23.97 also available) - Synchronisation : Internal / External CSync, Tri-level HD Sync
- Min Illumination : B&W: 0.02lx (1/2sec, Gain +32db); Colour: 0.5lx (1/30sec Gain +32db) 1080p/30 @f1.6 (Wide end)
- Dynamic Range : 80db (with WDR ON)
- Max Gain : +42db
- Gamma Correction : 0.3, 0.45, 0.475, 0.5, 0.525, 0.575, 0.6, 0.8, 1.0
- Day / Night : IR mode with manual or automatic operation
- Shutter : 2sec ~ 1/10,000sec
- Edge Enhance : 16 steps
- Operation Temp : 0 ~ 60°C
- Effects : Neg / Pos / B/W
- Q3 head :
- Pan Speed : Maximum 90° / Sec ; Minimum 0.25° / Sec (360° in 90 mins)
- Tilt speed : Maximum 90° / Sec ; Minimum 0.25° / Sec (360° in 90 mins)
- Pos Repeat : .02°
- Mounting : Standard ¼” UNC or Special square slide mount
- Size : 250mm high x 127mm diameter
- Weight : 2.1kg
- Q3 Interface Box :
- Head Cable : Lemo 10w
- Inputs :
- Audio Data (Camera Corps standard)
- RS232, RS422, Ethernet IP
- Genlock – BNC
- Outputs :
- HD-SDI x2 BNC
- Composite Video BNC
- RS232, RS422, Ethernet IP
- Size : 160mm x 103mm x 53mm
- Weight : 0.5 kg
- Power Supply : 9 – 36v DC Input. (XLR4 pin1 0v, pin4 +ve)
- Consumption : 12 watts
