Chauvet ÉPIX Strip IP 50

Chauvet ÉPIX Strip IP 50

ÉPIX Strip IP 50 is an IP65 outdoor-rated pixel-mapping ½ meter LED strip fixture, featuring 50 LEDs. Ideal for use in tight spaces, this versatile fixture also comes with dome and flat accessories and stunning pre-built content to allow you to easily configure and program shows in minutes with minimum time/effort. Power and control it through our new ÉPIX Drive 2000 IP on Art-Net, Kling-Net, or sACN (streaming ACN).

At a glance :

• Pixel-mapping IP65 outdoor half-meter 50 x 1 LED strip for showing video and/or motion graphics
• Includes square milky filter (installed) for diffused output, round milky filter (included) for diffused output, and black stealth filter (included) for high contrast
• Uses specialized LED dimming control via S-PWM (scrambled PWM), which enhances on-camera performance.
• Versatile control options include Art-Net, Kling-Net, and sACN (streaming ACN) to support the touring, rental, and installation markets
• Reduce programming time and increase application by using the alternate personalities of 7 channel, multi-section control (15-30 channels), or use the Pixel personality (150 channels) for use with video servers
• Increase viewing angle by using the dome or square accessory
• ÉPIX Drive 2000 IP required for operation

Specifications :

Optical :

• Light Source: 50 LEDs (tri-color RGB) SMD 5050, 50,000 hours life expectancy
• Viewing Angle (with installed Square Milky Filter): 160°
• Viewing Angle (with optional Round Milky Filter): 160°
• Viewing Angle (with optional Black Stealth Filter): 125°
• Illuminance – open: 8,640 NITS
• Illuminance – Square Milky Filter (installed): 2,470 NITS
• Illuminance – Black Stealth Filter (included): 1,455 NITS
• Illuminance – Round Milky Filter (included): 1,360 NITS
• Pixels: 50 x 1Pixel Pitch: 10 mmRefresh Rate: 4,800 Hz (S-PWM)

Construction / Physical :

• Dimensions (with installed Square Milky Filter ): 19.68 x 1.33 x 3.93 in (500 x 34 X 100 mm)
• Dimensions: (with included Black Stealth Filter) 19.68 x 1.33 x 3.46 in (500 x 34 x 88 mm)
• Dimensions (with included Round Milky Filter): 19.68 x 1.77 x 5.03 in (500 x 45 X 128 mm)
• Weight: 3.4 lb (1.5 kg)
• Exterior Color: Black
• Housing Material: Aluminum

Connections :

• Data Connectors: IP-65 4-pin XLR
• Physical Linking: 20 inline ÉPIX Strip IP per port of Drive 2000 IP
• Minimum required device linking cable size: 4 conductor (2 x 14 AWG, 2 x 16 AWG)
• Total max. cable length (shielded cables) between ÉPIX Drive 2000 IP and last ÉPIX IP fixture: 210 ft (64 m)
• Max. cable length (shielded cables) between ÉPIX Drive 2000 IP and first ÉPIX IP fixture: 65 ft (20 m)
• Max. cable length (shielded cables) between ÉPIX IP fixtures: 60 ft (18 m)
• Total max. cable length (unshielded cables) between ÉPIX Drive 2000 IP and last ÉPIX IP fixture: 300 ft (91 m)
• Max. cable length (unshielded cables) between ÉPIX Drive 2000 IP and first ÉPIX IP fixture: 150 ft (45 m)
• Max. cable length (unshielded cables) between ÉPIX IP fixtures: 100 ft (30 m)

Control :

• Control Protocol: Art-Net, Kling-Net, sACN
• Control Channels Art-net, sACN: 7, 15, 30, 75, or 150

Electrical :

• Power and Current: 16 W, 0.133 A @ 120 V, 60 Hz
• Power and Current: 17 W, 0.082 A @ 208 V, 60 Hz
• Power and Current: 17 W, 0.073 A @ 230 V, 50 Hz

Certifications / Quaifications :

• CE, MET
• IP Rating: IP65, outdoor/wet
• Temperature (Ambient): -4 °F to 113 °F (-20 °C to 45 °C)

What’s included :

• ÉPIX Strip IP 50
• Square milky filter (installed)
• Round milky filter (included in box)
• Black stealth filter (included in box)

Required accessories :

• Controller (required): ÉPIX Drive 2000 IP
• Compatible Mounting Options: M12 Bolt/Clamp (rear mounting)