ColorKinetics Colorblaze 48
Including flightcase when buying 6 pieces
The ColorBlaze® 48 fixture washes large areas with far-reaching, rich, saturated colors and colorchanging lighting effects. The streamlined, four-foot black metal housing provides a simple yet powerful solution for large-area scenery and wash lighting for theaters, TV and video studios, concerts, events, casinos, and exhibits. On-board power supplies and addressing capabilities eliminate the need for dedicated support equipment and simplifies specification and installation. The auto-switching power supplies work around the world.
Designed in a rugged extruded aluminum housing, each fixture features attached mounting brackets with two, 1/2-inch (13 mm) mounting holes for use with Cheeseborough clamps or pipe clamps.
Locking knobs located on the mounting brackets allow for 180° rotational adjustment and locking without the use of special tools. Optional mounting brackets are available for T-handle mount applications.
Each ColorBlaze 48 fixture has eight individual circuit board assemblies, each with 18 high-intensity LEDs. This makes it sequentially controllable in 6-inch increments by a Color Kinetics DMX controller or a third-party DMX512 controller. Each circuit board is pre-addressed for Light# 1-8/DMX# 1-24. Data can be daisy-chained from fixture to fixture with an RJ-45 data cable or an XLR-5 data cable.
For protection from overheating, ColorBlaze 48 has been designed with a temperature monitoring feature. If operating temperatures rise to an unsafe level, a compensation circuit is triggered and ColorBlaze 48 operation is interrupted causing the lights to turn dull red. After 30 minutes the lights will auto-cycle and return to full intensity.
COLORBLAZE 48 SPECIFICATIONS
COLOR RANGE : 16.7 million (24 bit) additive RGB colors; continuously variable intensity output range
SOURCE : High intensity power light emitting diodes (LEDs)
BEAM ANGLE : 10°
HOUSING : Extruded aluminum with black finish
POWER CONNECTOR : IEC 15A (max) with C13 plug, UL/cUL rated 2-pole, 3-wire, grounded, 15A, flying leads
DATA CONNECTORS : RJ-45 or XLR-5
LISTINGS : UL/cUL, CE, PSE
DATA INTERFACE : DMX512
CONTROL : Color Kinetics’ line of DMX controllers or other DMX512 (RS-485) controllers
POWER REQUIREMENT : 100-240VAC
POWER CONSUMPTION : 280W, 2.5A nominal at full intensity (full RGB)
TEMPERATURE RANGE : -40°F to 122°F (-40°C to 50°C) operating temperature, 14°F to 122°F (-10°C to 50°C) starting temperature