Dynacord Powermax P5 System + PM 2600 Amplifier

Dynacord Powermax P5 System + PM2600 Amplifier in good condition.

• 2x Dynacord F 150 High power 2‑way system
• 2x Dynacord F8 Subwoofer
• 1x Dynacord PM2600 Amplifier

The F 150 is designed as a high power 2-way system and can be used as a fullrange cabinet, with passive subwoofer (e.g. F8) or as a mid/high part in active multi-way speaker systems (recommended active x-over frequency 80-120 Hz). An Electro-Voice lowfrequency speaker DL 15Y works in the low/mid frequency range between 50 Hz and 1.6 kHz. The high frequency range above 1.6 kHz is radiated by an Electro-Voice HT 94 Constant Directivity horn system equipped with a DH 2T driver. The F 150 is equipped with a passive crossover (1.6 kHz – 18 dB/octave). Every loudspeaker chassis is reliably protected against critical power levels and short thermal overload by thermo switches and halogen lamps. The F 150 cabinet is made of poplar plywood 18 mm. All corner joints and braces are grooved and glued to reduce natural resonances to a minimum. The cabinet surface is finished in extremely resistant needled black-mottled felt. A powder-coated steel grille and an acoustic foam front protects the speaker front. The connector panel of the F 150 uses two 4-pole Speakon connectors (Input/Output) for safe connection and easy chaining to the next loudspeaker. The pin assignment is switchable from NORMAL to SYSTEM. The handle trays on the side guarantee easy and safe transport. 4 large-sized rubber feet and a recessed speaker stand barrel allow various set-ups. Using the RK2 (rigging retrofit kit) provides the possibility to employ the F 150 in any “flying” application.

The F8 subwoofer provides highest efficiency in a truly compact enclosure. The Electro-Voice EVX180A woofer working in this vented cabinet design ensures highest acoustical output, tremendous efficiency, and extremely low distortion rates.

The PM2600 4-channel controlled power amplifier provides an overall output power capacity of 2600 watts into 4 ohms. Although being suitable for universal use, the amplifier has been mainly designed to easily accomplish professional active 2-way sound reinforcement installations incorporating full-range loudspeaker systems and sub woofers. This controlled power amplifier provides an integrated PowerMax12 frequency crossover, several processor-controlled functions, equalizers for matching the sound to acoustic necessities of the location or to the incorporated loudspeaker cabinets respectively, as well as extensive protection circuitry. The four power amplifier blocks of the PM2600 are designed in “Linear Precision Topology”. This meanwhile legendary concept provides highest audio quality with an output power capacity of 2 x 700W / 4 ohms for the LO-channels and 2 x 600W / 4 ohms for the HI-channels. Up to three loudspeaker systems with a nominal impedance 8 ohms each can be connected to each output channel. The newly developed PowerMax12* frequency crossovers optimally utilize the amplifiers powerful performance as well as the reproduction and transmission abilities of full-range loudspeaker systems and sub woofers. Compared to conventional frequency crossovers, this ensures outstanding sound improvement with less effort. With a crossover frequency of 110 Hz, 12dB/octave, basically any full-range / sub woofer combination can be operated.