Electro Voice P1202 + M212 Module

Electro Voice P1202 Power Amplifier + M212 Module Card in good condition.

2 x 600W Modular Precision Series Amplifier

P-Amps – a modular power amplifier concept and the most flexible solution for any mobile and permanent installation application. The modular architecture of the P-Amps allows flexible selection of filter/signal processor as well as input and output modules. This provides the possibility to easily include P-Amps power amplifiers into basically any existing and most of all any future application, using principally any connection technique.

Technical Specifications:

• Load Impedance: 8 \ 4 \ 2 Ohms
• Maximum Midband Output Power, THD = 1%, 1 kHz: 2 x 380 W \ 2 x 600 W \ 2 x 850 W
• Rated Output Power, THD < 0.2%, 20Hz – 20kHz: 2 x 250 W \ 2 x 500 W \ ————
• Max. Single Channel Output Power, Dynamic-Headroom, IHF-A: 460 W \ 880 W \ 950 W
• Maximum RMS Voltage Swing, THD = 1%, 1 kHz: 64 V
• Voltage Gain at 1 kHz: 30 dB
• Slew Rate at 1 kHz: 30 V/us
• Power Consumption at 1/8 maximum output power @ 4 Ohms: 870 W
• Input Sensitivity at rated output power at 4 Ohms, 1 kHz: 1.4 V
• THD at rated output power, MBW = 80 kHz, 1 kHz: < 0.05 %
• IMD-SMPTE 60 Hz, 7 kHz: < 0.08 %
• DIM30, 3.15 kHz, 15 kHz: < 0.03 % Crosstalk Attenuation ref. 1 kHz, at rated output power: > 80 dB
• Frequency Response ,-1 dB, ref. 1 kHz: 13 Hz – 45.000 Hz
• Power Bandwith, THD = 1%, ref. 1 kHz, half power at 4 Ohms: 10 Hz – 50.000 Hz
• Input Impedance, 20 Hz – 20 kHz, balanced: 20 kOhms
• Damping Factor at 100 Hz / 1 kHz, 8 Ohms: > 300 / > 200
• Signal to Noise Ratio, A-weighted: 106 dB
• Protections: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
• Dimensions (W x H x D): 483 x 132.5 x 426 mm
• Weight: 17 kg