€225,00 excl. vat
| Weight | 20 kg |
|---|---|
| Dimensions | 60 × 46 × 23 cm |
| Brand |
Electro Voice |
| Condition Used |
Second hand (Average/good condition) ★★✰ |
| Product images |
Images made in our Photo Studio |
1 in stock
The audio performance of CP power amps are simply extraordinary. Optimised power supply units employing low-leakage toroidal transformers and the consistent use of Class-H technology provide exten-sive headroom far above the stated nominal output. At the same time this contributes to a reduction inweight and power dissipation.The CP-Series is designed in Class-H technology, i.e. the power amp provides extremely fast, signal-dependent operating voltage switching, which results in doubling the regular supply voltage when needed.Compared to Class-AB power amps, Class-H power amps generate by far less power dissipation atidentical output. Consequently, reduced leakage power or dissipation is synonymous to less waste heat– energy is used more efficiently. As a result, installing Class-H power amps within rack shelf systemsis possible with less space between appliances. In addition to that and despite offering identical output,power consumption is a lot less than in Class-AB operation.
| Load Impedance : | 2Ω | 4Ω | 8Ω |
| Maximum Midband Output Power THD = 1%, 1kHz, Dual Channel |
900W | 600W | 350W |
| Rated Output Power THD < 0.1%, 20Hz … 20kHz |
— | 500W | 250W |
| Max. Single Channel Output Power IHF-A |
1450W | 850W | 450W |
| Max. Single Channel Output Power Continuous, 1kHz, THD-1% |
1200W | 720W | 410W |
| Max. Bridged Output Power THD = 1%, 1kHz |
— | 1800W | 1200W |
| Maximum RMS Voltage Swing THD = 1%, 1kH |
62V |
| Power Bandwith THD = 1%, ref. 1kHz, half power @ 4Ω |
10Hz … 60kHz |
| Voltage Gain ref. 1kHz |
32,0 dB |
| Input Sensitivity at rated output power |
+3.2 dBu (1.12 Vrms) |
| THD,at rated output power MBW = 80kHz, 1kHz |
< 0.05% |
| IMD-SMPTE 60Hz, 7kHz |
< 0.02%
|
| DIM30 3.15kHz, 15kHz |
< 0.01% |
| Maximum Input Level | +22dBu (9.76 Vrms) |
| Crosstalk ref. 1kHz, at rated output power |
<- 80dB |
| Frequency Response ref. 1kHz |
15Hz … 40kHz (+/- 1dB) |
| Damping Factor 1kHz |
> 300 |
| Slew Rate | 30 V/ms |
| Signal to Noise Ratio, Amplifier A-weighted |
105.5dB |
| Output Stage Topology | Class H |
| Power Requirements | 230V; 50 … 60 Hz (factory configured) |
| Power Consumption 1/8 maximum output power @ 4Ω |
500W |
| Protection | Audio limiters, High temperature, DC, HF, Back-EMF,Peak current limiters, Inrush current limiters, Turn-on delay. |
|
Cooling
|
Front-to rear, 3stage-fans |
| Safety Class | I |
| Dimensions (W x H x D), mm |
483 x 88,1 x 386,8 |
| Weight | 15 kg (33 Ibs) |
When you've added items to your cart you can go to the checkout page. On this page you will be able to see which transport options are available to you and at what price.
If there is no shipping option available when you fill in your address, please contact us
You can always ask for a quote on the check out page. We ship worldwide!
If you've got any questions about shipping please don't hasitate to contact us. You can do this by form, email, chat or phone. Whatever is more convenient for you.
Cross-Functional AV Gear
