ElectroVoice CPS 4.10 1000 W/CH 4‑CH Amplifier

ElectroVoice CPS 4.10 1000 W/CH 4‑CH Amplifier

Includes RCM-810 option card.

The Electro-Voice CPS4.10 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 1000 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. power output into either 2 Ω, 4 Ω, 70V- or 100Vnetworks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation, the CPS4.10 provides remote standby switching with just 5 Watts consumption in standby mode.

An optional remote control module RCM-810 (installed) provides control and supervision features via IRIS-Net, including monitoring of amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 Ω and 10 Ω, in steps of 0.1 Ω.

Features : 

• Four channels in one compact rack-efficient unit
• 1000 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
• IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans

Specifications : 

• Network Control (IRIS-Net) & CAN Bus Interface : RCM-810 card installed
• Frequency Response (-3 dB) : 15 Hz-30 kHz
• Impedance : 2/4/8/8 VLD/70 V/100VΩ
• Input Impedance (Balanced) : 20kΩ
• Input Sensitivity : 0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
• Continuous Rated Power (1 kHz, THD 1%) 4Ω : 1000Watts
• Amplifier Gain  : 32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
• Continuous Rated Power (1 kHz, THD 1%) 100v : 1000Watts
• Continuous Rated Power (1 kHz, THD 1%) 70v : 1000Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω : 900Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 100v : 900Watts
• Electronics Type : Amplifier
• Continuous Rated Power (20-20 kHz, THD<0,2%) 70v : 900Watts
• Continuous Rated Power (1 kHz, THD 1%) 2Ω : 1000Watts
• Analog Inputs : 4, electronically balanced, Phoenix-type
• Continuous Rated Power (1 kHz, THD 1%) 8Ω : 500Watts
• Maximum Input Voltage : +22 (9.76 Vrms)
• Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω : 450Watts
• Maximum Bridged Output 8Ω : 2000Watts
• Mains Voltage : 220 – 240 V, 50 – 60 Hz or 120 V, 50 – 60 Hz, 50 – 60 Hz
• Maximum Bridged Output 4Ω : 2000Watts
• Total Harmonic Distortion : 0.05%
• Cooling : Front-to-Rear, continuously variable fans
• Slew Rate : 28V/µs
• Audio Network : No
• Intermodulation Distortion (SMPTE) : 0.05%
• Variable Load Drive (VLD) : Yes
• DIM 30 : 0.02%
• Topology : Class-D
• Signal-to-Noise Ratio (A-weighted) : 103dB