ElectroVoice PX2152 (SET)

ElectroVoice PX2152 Speaker Boxed Set of 2 including flightcase

The Electro-Voice® PX2152 is a high efficiency 2-way loudspeaker system that is part of the Electro-Voice® Phoenix Series and is intended for high output sound reinforcement in fixed-installation and portable sound applications. The PX2152 is capable of being configured as either passive or biamp, and used fullrange or with a subwoofer for LF extension.
The PX2152 uses two DVX3150 woofers, a high output 15-inch woofer with forced air cooling, in a vented enclosure. HF is delivered by dual ND2-16 compression drivers precisely summed in a manifold for increased power handling, maximum SPL, and low distortion. The very low distortion 60° x 45° horn provides the optimal coverage for medium throw, and is rotatable. Designed to be used as array elements, two PX2152’s can be arrayed together for 120° of horizontal coverage in the standard configuration, or 90° if the horns are rotated. The enclosure is constructed of 18mm, 13-ply plywood, using tongue and groove joints and EVCoat for long term durability.
The PX2152 is designed as a full range loudspeaker, and can be used with a PX2181 for maximum low frequency output. The enclosure shares the same footprint as other speakers in the Phoenix line for system flexibility.

Specifications

Freq. Response ( z -3 dB) : 60 Hz – 15 kHz
Freq. Range ( z -10 dB) : 50 Hz – 19 kHz
Rec. Hipass Frequency : 40 Hz
Axial Sensitivity : 99 dB (1W/1m)
Max Calculated SPL : 136 dB
Horizontal Coverage : 60°, or 45°
Vertical Coverage : 45°, or 60°
Power Handling (Passive) : 1200W Continuous, 4800W Peak
LF Power Handling (Biamp) : 1000W Continuous, 4000W Peak
HF Power Handling (Biamp) : 80W Continuous, 320W Peak
LF Transducer : (2) DVX3150, 15 in. (381mm) Driver
HF Transducers : (2) ND2-16, 2 in. (50mm) Diaphragm Compression Drivers
Crossover Frequency : 1900 Hz
LF Impedance : 4 Ohms Nominal
HF Impedance : 8 Ohms Nominal
Connectors : (2) Neutrik Speakon NL4’s
Enclosure Material : 18mm Plywood with Black EVCoat
Suspension : (8) M10 Points – (6) on Top and (2) on Bottom of Enclosure
Grille : Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo