Martin Audio MSX / MLA Mini Line Array SET

Martin Audio MSX / MLA Mini Line Array SET

Set includes :

• 2x Martin Audio MSX Sub
• 8x Martin Audio MLA Mini
• 2x ASF20055 Transition Frame with Flying Pins (Single)
• 2x MLA Mini Flying Frame
• 2x Sub Dolly
• 2x Stack Dolly
• 4x Moulded Y-cable
• 1x Link cable
• 1x USB cable

MLA Mini arrays and MSX’s can be remotely controlled over the U-NET™ network from a laptop or wireless tablet running VU-NET control software. Small-scale systems – such as the configuration of 4 x MLA Minis and 1 x MSX – can be set up to plug-and-play without external control, with onboard presets recalled by a rear panel selector switch.

The MSX is the same width as the MLA Mini and can be integrated into flown arrays or ground-stacked separately. It features a 15″ (380mm)/4″ (100mm) voice coil, long-excursion driver reflex-loaded in a very compact enclosure.

For complete installation versatility, the power plant module itself can be rack- mounted and its sub-bass amplifier channel used to power either an MSX or an alternative Martin Audio 4 Ohm passive subwoofer. For ultimate sub-bass performance, the MLA Mini/MSX combination can be used with the powered DSX subwoofer.

Martin Audio MSX :

• TYPE : 15” reflex loaded subwoofer
• FREQUENCY RESPONSE : 50Hz-150Hz ± 3dB, -10dB @ 42Hz
• MAXIMUM SPL @ 1m : 133dB continuous, 136dB peak (3)
• Driver : 1 x 15” (380mm)/4” (100mm) voice coil, ultra-long excursion, high efficiency ferrite magnet
• RATED POWER : 800W AES, 3200W peak
• MSX Dispersion : Omnidirectional. Cardioid arrays possible, using multiple MSX enclosures
• CONNECTORS : Female XLR input, male XLR link output
• ANALOGUE INPUT IMPEDANCE : 20kΩ balanced to ground
• MAXIMUM ANALOGUE INPUT LEVEL : 6.15Vrms (+18dBu), over voltage protected
• AES/EBU IMPEDANCE : 110Ω balanced, receive and transmit termination
• Internal Processing :
  • Multi-channel DSP, programmable via network
  • 10 PEQ/shelving filters per channel
  • Up to 48dB/Oct HPF and LPF
  • FIR filtering on MLA Mini channels
  • Up to 1 second of delay
  • Limiters with amplifier output current monitoring
• Network :
  • CONNECTORS : IP68 rated 8-way, quick-release type
  • PROTOCOL : U-NET
• Amplifier Module : 9 channel switch-mode, class D
• PEAK OUTPUT POWER :
  • 7000W total
  • 1400W MSX (or alternative 4 Ohm subwoofer)
  • 700W MLA Mini LF x 4
  • 700W MLA Mini HF x 4
  • CONNECTORS : 2 x NL8 outputs to MLA Mini x 4
  • AVERAGE EFFICIENCY : 85%

Martin Audio MLA Mini :

• Numerically optimised, ultra-compact loudspeaker system
• Cellular array format with amplification, multi-cellular DSP and digital networking housed in companion sub-bass
• Dedicated Class D amplifiers for individual powering of individual cells
• Industry leading DISPLAY2.1™ intelligent software interacts with DSP for highly accurate array optimisation
• Vertical coverage can be fine-tuned electronically to cope with changing environmental conditions and last minute changes in rigging height
• “Hard-avoid” areas, such as on-stage, ceilings and site perimeter, can be programmed in
• Switched mode power supplies with PFC (Power Factor Correction) and global mains voltage operation
• Two-way design delivers LF/HF peak SPL’s of 130/129dB @ 1m from a single, ultra-compact enclosure
• Fast, integral flying system for suspension of up to 16 MLA Mini or 12 MLA Mini + 3 MSX enclosures
• True 100° (-6dB) horizontal constant directivity. Consistent and usable out to 125° (-10dB)
• 76Hz-18kHz ± 3dB frequency response