Martin Audio Wavefront W8LMDi Line Array (Downfill)

Martin Audio Wavefront W8LMDi Line Array (Installation Line Array)

The Martin Audio W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM.

Features :

• Stand alone vertically arrayable enclosure
• Line array downfill element
• Consistent 120º (-6dB) horizontal mid and HF pattern control
• 20º (-6dB) vertical dispersion
• Tripod mountable singularly or in pairs
• Amplitude shading switch
• Passive or Bi-Amp format
• Compatible with WMX, WLX, WSXa, WS2A & WS218 subwoofers

Specifications :

• Type : Three-way, active/passive, mini downfill line array element
• Frequency response : 60Hz-18kHz ± 3dB
• Drivers :
  • LF + MF Section :
    • 8″ (200mm)/2″ (50mm) voice coil, reflex-loaded direct radiator
    • 8″ (200mm)/2″ (50mm) voice coil, neodymium driver, front horn loaded, rear reflex loaded
  • HF Section :
    • 2 x 1″ (25mm) exit HF compression drivers, horn loaded
• Rated power :
  • LF + MF : 400W AES, 1600W peak
  • HF : 75W AES, 300W peak
  • FR : 400W AES, 1600W peak
• Sensitivity :
  • LF + MF : 99dB
  • HF : 104dB
  • FR : 98dB rising to 103dB at HF
• Maximum SPL :
  • LF + MF : 125dB continuous, 131dB peak
  • HF : 123dB continuous, 129dB peak
  • FR : 124dB continuous, 130dB peak
• Nominal impedance :
  • LF + MF : 12 ohms
  • HF : 12 ohms
  • FR : 12 ohms
• Dispersion (-6dB) :
  • 120º horizontal (down to 750Hz)
  • 20º vertical
  • 140º horizontal (down to 650Hz) @ -10dB
• Crossover :
  • 300Hz passive, 2.2kHz active or passive
  • Shading control switch – rear mounted
• Enclosure : Vertical trapezoid with 10º wall angle, multi- laminate birch ply construction
• Finish : Textured black paint
• Protective grille : Black perforated steel
• Connectors : 2 x Neutrik NL4
• Fittings :
  • Proprietary rigging system
  • 2 x pocket handles each side
  • 4 x M8 inserts for externally mounted top hat fitting
• Dimensions :
  • (W) 620mm x (H) 284mm x (D) 400mm
  • (W) 24.4ins x (H) 11.2ins x (D) 15.8ins
• Weight : 30kg (66lbs)