Showtec DigiDim-12 Pro

Showtec DigiDim-12 Pro

The DIGIDIM-12 pro is a DMX512, 12 x 10 Ampere Digital Module Dimmerpack (3 x 32 A) which incorporates a 32-bits high power microcomputer with a time processing unit and a big graphic LCD display.

Separate DMX addressing for each channel. Each channel can be programmed with the DMX address, a control curve, output-limit, preheat and the load check. Free programming of control curves.

• 12 internal memories can be recalled as required, the memory can be activated to fade-in, fade-out or to chase.
• The chase containing the internal memories can be started.
• The chasing-speed, fadetime and the number of steps (1-12) can be programmed.
• DMX-Off or DMX-Failure can start a chase or call a memory.
• This dimmer can be completely locked while the DMX or analog input works normally as before.
• DMX and MIDI input.
• Master / Slave mode.
• MIDI accepts “program change” signals to call the internal memories, chase or “OFF”. Analog input works without any adjustment Short circuit protection for each channel with a 16 A circuit breaker.
• Simple and concise operation due to few, clear menus.
• The LCD shows the input or output signals, phase voltage, channel setting, memory, etc.
• Alarm of over-voltage and over-temperature with switch-off.
• Electronic fuse and load-check .
• Single phase connection: 10A/channel, total 96A.
• 3 phase connection: 10A/channel, total 32A per phase.
• Power requirement: AC 230V 50/60 Hz.
• Dimensions: 483 x 436 x 178 mm (19″/4U)
• Weight: 31 kg