Sound Projects SP2 Complete SET

Used Sound Projects SP2 SET.

• 2x SP TOP
• 2x SP2-15 SUB

SOUND PROJECTS‘ SP2 system combines maximum efficiency, true versatility, compactness and expandability in one twin-bin concept. The SP2 system is designed for medium to small sized configurations. A double stack set-up already provides enough SPL for a audience of a few hundred people. The SP2 system is endlessly expandable, and interchangeable with SOUND PROJECTS SP3and SP4 systems because of their compatible crossover positions.The system is applicable in numerous situations, fixed or touring, ranging from bands to small theatres or churches and from acoustic instruments to dance acts. The SP2 system is particularly useable at medium sized rooms, even with difficult room shapes.Master Blaster‘s philosophy to provide systems with virtually flat frequency response enables the sound engineer to create his/her specific sound with minimal effort.

For most programme material the power balance between one SP2top and one SP15 sub-low will be just right, although in single stack set-ups one could prefer to use SP2-15 bass cabinets instead. Apart from taste this is of course largely dependent on programme and venue.The advantages of self-powered system design are constantly employed to achieve maximum efficiency through optimal cooperation of the different components e.g. speakers, horns, filters electronics.Ease of use has been a key feature in all SOUND PROJECTS designs. Therefore nothing but the necessities are employed in a SOUND PROJECTS system. True PLUG AND PLAY without crash sensitive hardware, often found in digital equipment. Minimal cabling, no complimentary control units, and virtually no equalising are necessary.

The SP2 Mounting Bracket is designed in compliance with the German BGV C1 rules for the prevention of accidents and can hold a cabinet in a large number of angles. For larger numbers of cabinets or combinations with SP3cabinets a proprietary rigging system, Quick-rig™, can be employed. Cabinet hardware for this system is standard in all SP2 top enclosures.To guarantee maximum reliability and noiseless (hiss free) operation each driver of the SP2system is powered by its dedicated 300W h-max® power amplifier. This unique and proprietary design is an integrated combination of amplifier, filter section and protection circuitry.The SP2 top cabinet is based on a 1” and a 12” mounted on a shared wave-guide. A switch at the back of the cabinet let‘s you choose between full-range or high-pass mode.

This clever option makes the SP2 top to a very compact, stand-alone loudspeaker, yet becomes a very powerful front of house system, when switched to high pass and combined with a sub-low.Despite of the wide horizontal dispersion the SP2 top cabinet is capable of generating an impressive 123dB SPL and even 125dB SPL when switched to high pass. The SP2-15 is a self-powered, port loaded design incorporating two of our proprietary 15” long excursion drivers that can make the same volume displacement as 21” drivers and yet generate the punch of a 15”. The specially shaped port enables the SP2-15 to achieve 129dB SPL continuous over the frequencies ranging from 30-80 Hz.